Trigger Pull on Micro 9 - Kimber Forum

Kimber


Go Back   Kimber Forum > Kimber Model Specific > Kimber Micro 9 Forum

Reply
 
LinkBack Thread Tools Display Modes
Old 02-10-2019, 02:56 PM   #1
Senior Member
 
1000RR's Avatar
 
Join Date: Jan 2019
Location: Florida
Posts: 198
Trigger Pull on Micro 9

I have 550 rounds through my new Micro 9. Not sure what the trigger pull was originally, but it's pretty good as she sits now. I borrowed the LGS's trigger measurement weight(s) - the old fashion type, non-digital.

I measured at the center of the curved trigger and it was just shy of 5.5lbs. Measured at the bottom of the trigger it was just shy of 4.5lbs (hinged trigger).

I also did my Kimber Classic Stainless 1911 .45 (~20yrs old and LOVE this gun). Before I bought it, the fella before me had some trigger work done to it and it's just beautiful to shoot. Trigger pull was just a little over 2.5lbs.

As an aside, I was at another LGS earlier in the week and he put a digital gauge on the Micro 9 and said it was just below 4lbs and said my 1911 was a bit less than 2lbs (with some readings around 1.4lbs). I didn't believe either which is why I decided to do it with an old fashioned mechanical measuring device.
1000RR is offline   Reply With Quote
Remove Ads
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Trigger Pull tommy b Kimber Micro 9 Forum 13 07-24-2018 01:05 PM
New Micro 9 ( Hvy. Trigger) Moose Kimber Micro 9 Forum 15 05-16-2018 09:34 PM
Micro 9 and new Shield 9 range visit GRISSSE Kimber Micro 9 Forum 7 05-31-2017 05:03 AM
Need advice on micro carry trigger please Dale440 Kimber Micro Carry Forum 11 02-18-2017 10:11 PM
My Micro 9 Review djo_34 Kimber Micro 9 Forum 16 02-08-2017 01:37 PM