Grip screw on K6s - Kimber Forum

Kimber


Go Back   Kimber Forum > Kimber Model Specific > Kimber Revolver Forum

Reply
 
LinkBack Thread Tools Display Modes
Old 05-18-2018, 01:06 PM   #1
Junior Member
 
Join Date: May 2018
Posts: 4
Grip screw on K6s

I recently bought my first Kimber, a K6s with the 3" barrel. I really like it but would like to make a slight change. The smooth wood grip is fine for my large hand; it gave me no problems at the range even when firing .357s. However, on the right side where the grip's securing screw comes through, the small area around it is bare. I'd like to find a tiny brass finishing washer to make it look more .....well, more finished than it does now. Can anyone tell me the size I need to buy, a size that will fit inside the hole drilled in the wood and secure to the protruding screw head?
Jack Gordon is offline   Reply With Quote
Remove Ads
Old 05-20-2018, 11:11 AM   #2
Junior Member
 
Eagle1*'s Avatar
 
Join Date: Oct 2017
Posts: 22
I would think that Kimber might be able to help you with this if you can find someone in the parts dept that would take the time to look for you. Other than that you may try an actual wood working store that has some hardware sold in there, someone there might be able to help as i think a hardware store employee at the big chains will not be of any help, but I could be wrong. I also think if you ca;;ed Altamont grip company they would know as they make grips for the Kimber, give them a try..
__________________
In God we trust, All others are checked through NICI!
Eagle1* is offline   Reply With Quote
Reply


Search tags for this page

k6s screw

Click on a term to search for related topics.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Grip Screw O-rings Tejun Kimber Talk 10 05-18-2018 12:37 PM
K6s grip removal Tom T Gunsmith 9 06-22-2017 02:31 PM
3 finger grip for K6S Agincourt Kimber Revolver Forum 14 06-10-2017 05:50 PM
Lost Grip Screw & Bushing On My Micro Raptor? Trafficlawyer Kimber Micro 9 Forum 51 01-14-2017 12:40 PM
Grip Screw Wrench; Ultra Aegis II 9mm Thumper1734 Kimber 1911 Forum 3 01-04-2017 01:56 AM