Does anyone know how to remove the K6S 2 inch original rubber gip. I removed the screw and i can't figure out how it pulls off. its not budging. I want to put on the grip for the K6S 3 inch wood grips. thank you.
I do not have those grips but if you got the screw out, I would just put a toothpick in from the screw side and see if it will not go through. Then tap it with a hammer and they should separate. In the "olden days" with stuck wooden grips, just a tap on the frame with a plastic hammer was enough to separate them. I do not know if that will gork for the rubber grips but it is worth a try.