Micro test after warranty repair - Kimber Forum

Kimber


Go Back   Kimber Forum > Kimber Forum Discussions > Kimber Talk

Like Tree10Likes
  • 9 Post By Joe
  • 1 Post By JC45
Reply
 
LinkBack Thread Tools Display Modes
Old 03-21-2017, 12:26 PM   #1
Joe
Junior Member
 
Join Date: Feb 2017
Posts: 11
Micro test after warranty repair

Took my micro 380 to the range today after getting it back from Kimber for ejection issues. Shot four different brands of ammo with it without a single malfunction and I couldn't be happier with it. It really is a sweet little pistol and is definitely my favorite of the little pocket guns which I have shot quite a few. Kimber did the following extractor adjusted, barrel reamed and polished, ejector and sear pin replaced, slide stop spring replaced, and recoil spring replaced. They then test fired 3 mags of buffalo 95gr, and 1 mag of Hornady 90gr jhp. One thing I found interesting was that they didn't clean it afterwards so I was able to see how much they lubricated it ( which was quite a bit compared to what I'm use to). I then cleaned it and lubed it as they did before I took it out. On a side note I stopped at a local gun store on the way to the range and discovered they had bought a 1978 s&w model 17 6 inch last night in mint condition. So long story short I ended up testing two guns today 😀
Chuck43, Dude22, 2sharp2 and 6 others like this.
Joe is offline   Reply With Quote
Remove Ads
Old 03-22-2017, 04:40 AM   #2
Senior Member
 
JC45's Avatar
 
Join Date: Dec 2015
Location: Northeast Pa
Posts: 6,258
That's good news Joe, it should be real nice when it's fully broken in.
Joe likes this.
JC45 is offline   Reply With Quote
Reply

Tags
micro

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to make your Kimber Micro reliable thread. sawman556 Kimber Micro Carry Forum 42 09-13-2018 07:06 PM
Micro .380...should I buy? shockfinder Kimber Micro Carry Forum 13 10-25-2016 10:44 AM
Took my new Micro 9 to the range DocHolliday Kimber Micro 9 Forum 14 08-05-2016 04:44 PM
Micro 380 serial numbers John316 Kimber Micro Carry Forum 6 07-29-2016 05:07 AM
Micro 9 Questions yourbandsucks Kimber Micro 9 Forum 17 07-13-2016 01:28 AM