Question About Questionable Magazine - Kimber Forum

Kimber


Go Back   Kimber Forum > Kimber Forum Discussions > Kimber Talk

Like Tree3Likes
  • 3 Post By Chuck43
Reply
 
LinkBack Thread Tools Display Modes
Old 06-06-2017, 04:37 PM   #1
Senior Member
 
Join Date: Mar 2017
Location: Northern Illinois
Posts: 229
Question About Questionable Magazine

After shooting my micro 380 today at the range I gave it a good cleaning when I got home. I decided to take all my magazines apart to clean them too since I didn't do it last time I shot it, and they needed it. My question is the follower on one mag doesn't slide freely up and down the magazine like the others do, it sticks a little at both ends but is free in the middle section. Its clean and shiny inside just doesn't move freely like the others. I think its one of the newer ones I bought on sale a few months ago but I have used it before not today though.

Don't know if I should just chuck it in the can or try replacing the follower. Oh, its a Kimber 6 round mag.
WillyD is offline   Reply With Quote
Remove Ads
Old 06-06-2017, 04:43 PM   #2
Senior Member
 
Albert.Cairns's Avatar
 
Join Date: Mar 2015
Posts: 1,848
If it's causing malfunctions mark it for range use only. If not I wouldn't worry about it and use it.


Sent from my iPhone using Tapatalk
Albert.Cairns is offline   Reply With Quote
Old 06-06-2017, 04:54 PM   #3
Super Moderator
 
Chuck43's Avatar
 
Join Date: Jul 2013
Location: Northern Illinois
Posts: 32,378
Don't toss it, first mark it in some way so it doesn't get mixed back in with your good mags. Then break it down and see if you can see where the feeder is rubbing on the mag. Using a pair of needle nose pliers you can make small adjustments to the feeder, it sometimes takes a bit of playing but I haven't found one yet that I couldn't get working right. Even after I get them working properly I still restrict them to range use only.
Marshall, 2sharp2 and Old Timer 57 like this.
__________________
BOTH POLITICIANS AND DIAPERS NEED TO BE CHANGED OFTEN AND FOR THE SAME REASON!
Chuck43 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
My Micro 9 Review djo_34 Kimber Micro 9 Forum 16 02-08-2017 12:37 PM
Help? Wilson magazine problem This.side.up Gunsmith 16 01-14-2017 03:06 PM
Micro 9 magazine eject failure via gravity charleyt Kimber Micro 9 Forum 23 12-27-2016 12:48 PM
SIS Ultra saved from a trade in Mike240 Gunsmith 24 08-30-2016 09:41 PM
Magazine Question -- Kimber NewB goodoz Kimber Talk 23 08-24-2016 11:09 PM