Kimber Talk Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
1,799 Posts
Discussion Starter · #1 ·
Could you measure the distance from breech face to inner claw of the extractor?

Thanks
 

·
Registered
Joined
·
1,799 Posts
Discussion Starter · #5 ·
Rim thickness is .055". Was wondering what Kimber was setting extractor at. Their 9s tend to be .060" but I open them to .064" for smoother feeding.

I have been asked to convert a 9 to 40 so I was curious if they set the 10s different since they is 40 breechfaces on their 9s. But that seems really tight.

Thanks
 

·
Registered
Joined
·
3,178 Posts
Rim thickness is .055". Was wondering what Kimber was setting extractor at. Their 9s tend to be .060" but I open them to .064" for smoother feeding.

I have been asked to convert a 9 to 40 so I was curious if they set the 10s different since they is 40 breechfaces on their 9s. But that seems really tight.

Thanks
Yeah, I don't think that is right either. I must be going blind.
 
1 - 7 of 7 Posts
Top