Kimber Talk Forums banner
1 - 19 of 19 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
New here. Love the forum. Just purchased a new Kimber 45 Ultra Carry II. Put a new two hole trigger, front and real Trijicon sights and some rosewood Navy grips on it. Also have the CT Laser grips. Taking the concealed carry permit class Sat. What are some worth while mods for this gun?
 

·
Registered
Joined
·
465 Posts
Welcome from Las Vegas, If the gun is new I would not do any modifications, at least till the warranty runs out. Do the standard break in to see if the gun runs to your satifaction, if it's good do your thing! Kimber will void your warranty for some things.......
 

·
Registered
Joined
·
11,761 Posts
Welcome from Georgia.
 

·
Super Moderator
Joined
·
38,381 Posts
Welcome to the forum from northern Illinois Navy Kimber. Sburick is right on the modifications, I hope you kept your original parts. Kimber's warranty is about bullet proof, ya, it's that good but... There's always a but, if you send your gun in for warranty work they will return your gun to stock and charge you for the new parts required to do that. Every time I replace a stock part on one of my Kimbers I always place the original part in a ziploc bag with a note stating which gun it came from. If the gun has to be returned to Kimber for any reason the stock parts go back in before it's sent off.
 
  • Like
Reactions: MPO Southy

·
Registered
Joined
·
309 Posts
Welcome from Florida enjoy your new Kimber.
 

·
Registered
Joined
·
747 Posts
Welcome to the group.
 

·
Registered
Joined
·
11,761 Posts
Greetings from the Free State of Georgia.
 

·
Registered
Joined
·
747 Posts
Hey, Flea. That's my line! :)
 

·
Registered
Joined
·
1,013 Posts
Welcome from Taylorsville, Ky. Sorry about the sinkhole. Oh the humanity!
 

·
Registered
Joined
·
11,761 Posts
I take full responsibility for my own actions. Repetitive welcomes shows a lack of due diligence on my part.


But I blame Skeeter.
 

·
Registered
Joined
·
3,757 Posts
Hey Ya'll!

Welcome to the forum from beautiful downtown Monroe, Georgia!!!
;););)

All I did to my Custom Stainless II was add the Crimson Trace Laser Grips. I have put thousands of rounds through my Kimber without a single malfunction. It has a fantastic trigger and it can literally shoot better than I can!!! :eek::eek: The only mod that I would make would be to install a set of Trijicon Night Sights.

Enjoy your new Kimber and be safe!!
 
1 - 19 of 19 Posts
Top