Kimber Talk Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter · #1 ·
Problem or Not?

When NO magazine is in the Pistol, you pull the slide Back and the Slide Lock locks in. Now I can understand when there is a mag in the Pistol and you pull back the slide it should lock back, but, not when there is No mag in it. Mind you I am Not touching the Slide Lock. Also when rounds in the mag I put the first round in and when I pull back on the slide all the way and release it will lock again.

Anyone had this Problem

Note: I have Fired this Pistol in the past w/no problems.:confused:
 

·
Registered
Joined
·
28 Posts
Discussion Starter · #5 ·
lockup

Called Kimber this AM, and talked with Chris, He told me to check the Spring under the Slide Stop, I thought I had it on Right the First time, Glad I called him. It works great now. I started to Blame the Gun, my Mistake it was my fault.

So a lot of us who blame the Solo, it is most likely us.

Note: The solo appeared to be right, because the slide did Not always lockup, I am glad I Called. I thought I had it on Right.:)
 

·
Registered
Joined
·
90 Posts
Called Kimber this AM, and talked with Chris, He told me to check the Spring under the Slide Stop, I thought I had it on Right the First time, Glad I called him. It works great now. I started to Blame the Gun, my Mistake it was my fault.

So a lot of us who blame the Solo, it is most likely us.

Note: The solo appeared to be right, because the slide did Not always lockup, I am glad I Called. I thought I had it on Right.:)
And this all comes from the great Houdini of firearms.
You . . . . . .NOT ! If it was just you, then it must also include everyone ?????
 
1 - 7 of 7 Posts
Top